Extended (more than 3 Meters)

MID-WALL SPLIT UNITS / SYSTEMS

Mid wall split units / systems needs to be affixed (installed) to a wall. They get the name “split unit / system” from the way they are constructed – with half of the unit mounted inside the home / office, and the other half mounted outside.

Includes:

• Evaporator (indoor-unit) mounted to inside wall of room / office.
• Condenser (outdoor-unit) mounted onto a set of brackets outside AND WHERE THE CONDENSER (OUTDOOR-UNIT) NEEDS TO BE EXTENDED TO:
  • – The same wall (of indoor-unit): More than 3 meters from inside.
  • – Different wall (of indoor-unit): More than 3 meters from inside.
  • – Mounted on floor: More than 3 meters from inside.
• Condensation water to drain freely from indoor unit to outside.
• Installation time approximately 3-8 hours.
• Installation options only available for Western Cape(Cape Town) ,Gauteng (Johannesburg, Pretoria and Durban (Kwazulu Natal) and surrounding areas).

Excludes:

• In case of condensation water not able to drain freely from indoor unit (Evaporator) to outside, a condensation pump will be required at an extra charge.
• All required materials more than 3 meters to be charged separately per meter thereafter.
• Electrical connections for air-conditioners to be carried out by a qualified electrician from distribution board (to be charged separately after site inspection).

Extended (more than 5 Meters) 

CASSETTE SPLIT UNITS / SYSTEMS 

Cassette split units / system needs to be affixed (installed) to a ceiling. They get the name “split unit / system” from the way they are constructed – with half of the unit mounted into a ceiling inside the home/office, and the other half mounted outside. 

Includes:

• Evaporator (indoor-unit) mounted to inside wall of room / office.
• Condenser (outdoor-unit) mounted onto a set of brackets outside AND WHERE THE CONDENSER (OUTDOOR-UNIT) NEEDS TO BE EXTENDED TO:
  • – More than 5 meters from evaporator (indoor-unit).
• Cassette split units / systems are manufactured with a built-in condensation pump and therefore do not require a free running drain line to the outside of the room / office.
• Installation time approximately 4-6 hours.

Excludes:

• All required materials more than 5 meters to be charged separately per meter thereafter.
• Electrical connections for air-conditioners to be carried out by a qualified electrician from distribution board (to be charged separately after site inspection).